Electric Guduma Rawar soja 28mm Zh2-28

Electric Hammer Drill 28mm Zh2-28 Featured Image

Short Bayani:

Aiki mai sauƙi, hakowa da sauri, dace da ci gaba da aiki

Yawan hakowa yana kaiwa ga aji na 3 kg guduma rawar soja

Sanye take da saurin canji chuck

50 mm diamita mai lanƙwasa, mafi ƙarfi

Aika mana imel

Bayanin Samfura

Alamar samfur

Sigogi

Input ikon:
Matsakaicin hakowa diamita (karfe):
Matsakaicin hakowa diamita (itace):
Matsakaicin hako diamita (kankare):
Matsakaicin hawan diamita na tubali (tare da ɗan rami):
Rated gudun:
Mimar Hammer:
Matsakaicin guda duka ƙarfi:
Nauyi:
Girman inji:
Tsarin clamping:

820W
13 mm
30mm
28 mm
68mm
0-1300 rpm
0-5100 sau / min
3.2 joules (dangane da daidaitattun EPTA)
2.8kg
350x88x210mm
SDS da ƙari

Abbuwan amfani

Binciken kafin aiki ya kamata ya cika abubuwan da ake buƙata:
1. Babu fasa ko lalacewa akan kwasfa da makama;
2. Kebul na USB da filogi suna nan daram, mai sauya aiki yana aiki yadda ya kamata, kuma haɗin sifili na kariya daidai ne, tabbatacce kuma abin dogaro;
3. Murfin kariya na kowane bangare ya cika kuma ya tabbata, kuma na'urar kariya ta lantarki abin dogaro ne.

Abu na biyu, bayan an fara kayan aikin inji, ya kamata a gudanar da shi ba tare da kaya ba, kuma ya kamata a duba alakar kayan mashin din kuma a tabbatar ya zama mai sassauci kuma mara matsala. Yayin aiki, mai zuwa bayan wuta ya zama mai karko, kuma bai kamata a yi amfani da ƙarfi mai yawa ba.

3. Ya kamata a mallaki rawar lantarki ko guduma a yayin aiki, kuma ya kamata a matsa bitar rawar a kan farfajiyar aikin ta rivet mai siffa ta musamman kafin a haka, sannan kuma a kore ta da matsakaiciyar ƙarfi don kaucewa girgiza; idan gudun ya ragu sosai, ya kamata a rage karfin don hana a cika motar. Pressureauki matsin lamba.

O1CN01PWrhGm1BtPkYaz0LB_!!2206566480003-01

Na huɗu, lokacin hawan hakowa, ya kamata ka mai da hankali don kauce wa ƙarfafawa a cikin kankare.
Na biyar, rawar lantarki da guduma na lantarki kashi 40% ne tsarin aiki, kuma maiyuwa ba za a ci gaba da amfani da shi na dogon lokaci ba.
Na shida, lokacin da buɗewar aiki ya fi 25mm, ya kamata a sami tsararren dandamali na aiki, kuma ya kamata a tsara shingen tsaro.

Bakwai, an hana yin lodi sosai Ya kamata a mai da hankali ga sautin da hauhawar yanayin yayin aiki. Idan aka sami wata matsala, to ya kamata a rufe injin kuma a duba shi nan take. Lokacin da lokacin aiki yayi tsayi, kuma haɓakar zafin jiki na inji ta wuce 60 ° C, ya kamata a dakatar da inji, kuma ya kamata a gudanar da aikin bayan sanyaya na halitta.
8. When the machine rotates, don't let go.
9. Yayin aiki, kar a taɓa ruwan sabar wutan lantarki, mutu da nika dabaran da hannunka. Idan aka gano ya zama mara kyau ko lalacewa, to ya kamata nan da nan dakatar da injin don gyara ko sauyawa, sannan ci gaba da aikin.

Yanayin aikace-aikace na guduma na lantarki

An yi amfani dashi ko'ina cikin gini, ado da sauran masana'antu, masu dacewa da kankare, Bangon Brick, dutse, da dai sauransu
Ayyukan rawar lantarki - Tare da tasiri (ƙa'idar CAM ta inji)
Ya dace da kankare, bangon bulo, hawan dutse da itacen ƙarfe, ƙarfe, aikin hako faren yumbu